Drains and plumbing
in Bellevue.
Drain cleaning, hydro jetting, and light plumbing across all of Bellevue. Cast iron under the Olde Towne homes, PVC-main root patterns in the Twin Creek and Chandler Hills subdivisions, and all the everyday stuff (running toilets, dripping faucets, leaky traps) in between. Two posted rates, $95/hr cable or $300/hr jet, with the camera scope included on every jet or descale. You'll know the price before we start.
Call (402) 690-7351Mon–Sat 7a–7p · 24/7 emergency · No travel surcharge for Bellevue
Where the pipe is and what year it went in
What's under your slab depends on the block.
1940s – 1960s
Olde Towne
& Fort Crook
Cast iron under the slab, with scale narrowing the bore 20 to 60 percent. Most homeowners don't realize it until the kitchen sink stops draining, and even then the real problem is 15 to 25 feet downstream, not the sink.
Fix: chain knocker + jet
1990s – 2000s
Twin Creek
& Chandler Hills
PVC sewer mains with mature trees overhead, and the roots work their way into joint lines and catch waste until the main backs up every 12 to 18 months. A cable buys you a few months. A properly done jet buys you a few years.
2010s – now
Capehart
& Beardmore east
The pipe out here is still clean enough that the usual call is a kitchen drain greased up fast from a disposal doing more work than it should, or a standard light-plumbing fix. Most of these end up as cable jobs, with the occasional jet for a stubborn one.
Fix: cable · $95/hr
Commercial strip
Mission Ave
& Galvin Road
Restaurant grease lines, parking-lot catch basins, and 1970s interior plumbing that was never built to carry commercial-grade volume. A scheduled cleanout on a monthly or quarterly cadence usually beats getting called out on an emergency.
A real Bellevue job
"HIGHLY RECOMMEND!! Called on Thursday at 4 p.m. and he was here Friday before 8 a.m.!! Jeff and crew were very professional, honest and very reasonably priced! He even talked to the city sewer department to get them out right away because he found a major blockage in the main city line! Will not use anyone else going forward!!"
Lesa P.
Google · Verified · Main-line emergency
That turnaround is the Bellevue standard. We don't pad the schedule. If we tell you Friday 8 a.m., we're there Friday 8 a.m.
What we actually see in Bellevue
Three eras, three different fixes.
Olde Towne cast iron (pre-1975)
Houses in the Olde Towne grid or anywhere south of Chandler Road that were built before 1975 are almost certainly running cast iron drain mains, and by now most of them have scale narrowing the bore. The giveaway is a kitchen sink that drains like molasses, and the reason it fails first is that it sits furthest from the city tap. The sink isn't the problem though. The scaled main 15 to 25 feet downstream is. We handle it with cast iron descaling: scope first to confirm the pipe is structurally sound, break the scale loose with a chain knocker, flush with the jetter, then scope again to verify. Runs $1,200 to $3,500 by footage, with the camera scope included at no extra charge.
Twin Creek PVC roots (1990s–2000s)
Twin Creek, Chandler Hills, and the newer subdivisions east of Highway 75 are all PVC-main neighborhoods with mature landscaping overhead. Roots find their way into joint lines, catch bits of waste, and eventually form a soft dam that backs the main up every 12 to 18 months like clockwork. A cable will cut a channel through the clog but leaves the root wall intact, which is why three months later you're on the phone again. One properly done hydro jet in Omaha with a root-cutter nozzle scours the pipe walls and gives you 2 to 3 years of breathing room. Most of these come in between $400 and $700 depending on access and footage, with a before-and-after camera scope on every one.
Newer builds east of Highway 75 (2000s+)
The newer construction east of Highway 75 is still too fresh to have scale or serious root problems, so most of what we see there is a kitchen drain that's greased up from a disposal doing more work than it should, or a straightforward light plumbing call. A running toilet, a dripping faucet, a new dishwasher hookup, a frost-free hose bib that split over the winter. It all bills out at $95/hr, same rate as the snake work.
Pre-sale sewer scopes
$250 flat. Easiest insurance you'll buy before closing.
For any Bellevue home older than 20 years, especially anything in the Olde Towne grid or the Fort Crook corridor, a standalone sewer camera scope at $250 flat before you sign usually pays for itself in the counter-offer. On-site walk-through so you see what the camera sees, with recorded footage available on request. If the scope comes back clean you close with peace of mind. If it doesn't, you have leverage before you sign.
Pricing in Bellevue
Two rates. Same as the rest of the metro.
Hydro jet
$300/hr
3,500 PSI jetter for sewer mains, kitchen drains, cast iron, grease, storm drains, recurring clogs. Camera scope on every job.
- You'll know the price before we start
- No dispatch fee, no diagnostic fee
- No travel surcharge inside the Bellevue service area
- Camera scope on every jet or descale job
- Standalone sewer scope: $250 flat
- Same posted rate day, night, or weekend
- Recorded MP4 available same business day
- 24/7 emergency phone
ZIP coverage · Bellevue
3 ZIPs. Same rate in every one.
68005 · 68123 · 68133
Olde Towne, Fort Crook, Twin Creek, Chandler Hills, Capehart, Beardmore, the Mission Avenue and Galvin Road commercial strip, and every address in between. If you're inside those ZIPs we're at the same posted rate with no travel surcharge.
Drain or plumbing problem in Bellevue? One call.
You'll know the price before we start. Same-visit on most Bellevue calls.
Call (402) 690-7351Common questions
Bellevue FAQs
01 What services do you offer in Bellevue?
Drain cleaning ($95/hr cable or $300/hr hydro jet), cast iron descaling for the Olde Towne and Fort Crook pre-1975 homes, sewer camera scopes ($250 flat standalone, or included at no additional charge on any hydro jet or descale job), storm drain cleanouts, and light plumbing (faucets, toilets, garbage disposals, dishwasher installs, shut-off valves, visible leaks, outdoor spigots). We don't do sewer-line replacement, trenching, pipe lining, full repipes, water heaters, or gas lines. We clear and jet drains; for structural pipe repair or replacement we refer out to local excavation and lining crews.
02 Do you repair or replace sewer lines in Bellevue?
No. We clear and jet drains, and we scope them with a camera to tell you what is going on inside the line. If a scope on your Bellevue sewer main shows actual structural damage (collapsed section, belly, offset joint, root-shattered pipe), we tell you honestly what we see and refer you to an Omaha-area excavation crew or a trenchless lining crew we work with.
03 How much does drain cleaning cost in Bellevue?
Two posted rates. $95/hr for cable or snake work on bathroom sinks and single toilets plus all the light plumbing. $300/hr for the hydro jetter on sewer mains, kitchen drains, cast iron, grease lines, storm drains. Billed hourly. No dispatch fee. No travel surcharge inside the Bellevue service area. Camera scope included on every jet or descale job.
04 How fast can you get out to a Bellevue address?
Business hours (Mon through Sat, 7am to 7pm), typical arrival is 60 to 90 minutes to a Bellevue address. Same-visit on most calls. After-hours and weekend by 24/7 phone for an active backup with a service-call premium disclosed before dispatch.
05 Do you do pre-sale sewer scopes in Bellevue?
Yes. $250 flat for a standalone sewer camera scope with an on-site walk-through, and recorded MP4 footage available on request. For any Bellevue home older than 20 years, especially anything in the Olde Towne grid or the Fort Crook corridor, a $250 scope before you sign is the cheapest insurance in the pre-list process. We show you exactly what the camera sees: cast iron scale, root intrusion, bellies, offset joints. If the scope comes back clean you close with peace of mind. If it doesn't, you have leverage before you sign.
06 My kitchen sink drains slowly in an Olde Towne Bellevue home. Is it the sink?
Almost never. If your Bellevue house is in the Olde Towne grid or anywhere south of Chandler Road and was built before 1975, the probability is high that your drain main is cast iron and has scale narrowing the bore. The scale builds gradually, and the kitchen sink is the last fixture to fail because it sits furthest from the city tap. Fix is cast iron descaling with a chain knocker plus hydro jet, with camera scope confirming before and after.
07 Why does my Twin Creek or east-side Bellevue main back up every 12 to 18 months?
Twin Creek, Chandler Hills, and the newer east-of-Highway-75 subdivisions are 1990s and 2000s PVC sewer mains with mature trees. The pattern is almost universal. Roots work their way into the joint lines, catch bits of waste, and eventually form a soft dam. A cable cuts a channel through that dam, but the root wall stays, so the clog comes back within months. One hydro jet with a root-cutter nozzle scours the pipe and buys 2 to 3 years, sometimes longer.
08 What ZIP codes do you cover around Bellevue?
All three Bellevue ZIPs: 68005, 68123, and 68133. Olde Towne, Fort Crook, Twin Creek, Chandler Hills, Capehart, Beardmore, the Mission Avenue and Galvin Road commercial strip, and every address in between. If you're inside those ZIPs we're at the same posted rate with no travel surcharge.
Next step / Make the call
One number for drains and plumbing in Bellevue.
(402) 690-7351 · $95/hr cable · $300/hr hydro jet · Camera scope included.