Hydro jetting in Omaha.
$300/hr. Camera included.
Omaha's hydro jetting specialists. 3,500 PSI of water through 300 feet of hose. The jetter actually clears the inside of the pipe. Grease, scale, roots, recurring clogs, sewer mains, cast iron, storm drains. Camera scope on every job so you see what came out.
Call (402) 690-7351Omaha metro + Sarpy County · Mon–Sat 7a–7p · 24/7 emergency
When the jetter is the right call
Four jobs where a cable won't actually fix it.
01
Same clog keeps coming back
Someone ran a cable, the clog came back in a few weeks or months. The cable only cut a channel through what was on the pipe walls (grease, scale, roots). It all closes up again. The jetter scours the inside of the pipe. Camera scope at both ends shows you why it kept clogging.
02
Sewer main backed up
Toilet, tub, and basement floor drain all gurgling or backing up at once means the sewer main is blocked. Jetter with the right nozzle clears it. Most residential main-line jet jobs wrap in about 2 hours. $600 typical.
03
Cast iron scale
Older Omaha neighborhoods (Dundee, Benson, Field Club, Bemis Park) with cast iron mains. Scale narrows a 4″ main down to 2″ before anyone notices. Chain knocker breaks it loose, jetter flushes it out. You see what came out on camera. Full process on the cast iron descaling in Omaha page.
04
Storm drains and grease
Parking lot catch basins, patio trench drains, downspout drains, restaurant grease lines. All back up for different reasons, all respond to the jetter. Available on a quarterly or semi-annual schedule for commercial accounts, same hourly rate.
What's on the truck
The equipment, in spec.
Pressure
3,500 PSI
Max working
Flow
8 GPM
Volume carries debris
Hose
300 ft
Reaches the street
Pipe size
1.5″–8″
Residential to commercial
Flush pattern nozzle for soft blockages. Root cutter nozzle for root intrusion. Penetrator for packed grease. Right tool for your line, every call.
The jetter in action
Mini-jetter on a floor drain.
What you're seeing
Short clip from a recent commercial job. Mini-jetter nozzle entering a floor drain — the reversed-pointing rear jets pull the hose downline while the forward jet cuts through grease and soft blockage.
Same 3,500 PSI as the main truck-mounted rig, on a compact reel for interior commercial drains, basement floor drains, and tight access runs. Same posted rate — $300/hr with camera scope included on every job.
A real Omaha jet job
"I had a problem with tree roots backing up the main sewer line causing our basement to flood. Jeff arrived promptly the following day and solved the problem within 2 hours. Jeff was transparent through the entire process, allowing me to visually watch on a video monitor as he blasted the roots to the main sewer drain. He inspected our 55-year-old clay pipes and gave me his opinion as he evaluated their condition."
Scott R.
Google · Verified · Residential main-line hydro jetting
Pricing
Posted rate. Hourly. No surprises.
Hydro jet
$300/hr
Billed hourly, no minimum beyond actual time on site. Camera scope included on every jet job at no additional charge.
On every paid job
- Upfront estimate before any work starts
- Camera scope before + after passes
- On-site monitor walk-through
- Recording available on request
- No dispatch fee, no diagnostic fee
- Itemized invoice before we leave
Most residential main-line jet jobs wrap in about 2 hours ($600 typical). Commercial grease jetting: $1,200–$2,400+ depending on footage. Cast iron descaling: $1,200–$3,500+ by footage.
Hydro jetting across Omaha
Where the jetter earns its keep in Omaha.
Midtown · cast iron country
Dundee, Benson, Field Club, Bemis Park, Blackstone, Morton Meadows, Leavenworth. Pre-1975 housing stock, cast iron mains under the slab. Scale narrows the pipe until the whole thing closes off. Chain knocker + 3,500 PSI jet is the only thing that actually clears it. We run these calls every week.
North + South Omaha · root territory
Keystone, Miller Park, Florence, Ralston, South Omaha. Mature yards, mature trees, roots in every pipe joint. Clay and cast iron mains. Root-cutter nozzle on the jetter clears the line, camera scope shows how much pipe is affected and how long before they're back.
West Omaha · PVC + storm drains
Elkhorn, Linden Estates, 168th corridor, West Dodge. Newer PVC mains hold up well, but storm drains and parking lot catch basins fill with silt, leaves, and debris. Flush-pattern nozzle clears them. Patio trench drains and downspout drains get the same treatment.
Commercial · grease lines
Old Market restaurants, Aksarben kitchens, Blackstone grease traps. Grease cools, sticks to the pipe walls, narrows the line. Jetter with the right nozzle scours the walls clean. Available on quarterly or semi-annual schedule, same hourly rate.
Where we jet
Hydro jetting across the Omaha metro + Sarpy County.
Ready to jet? One call.
Upfront estimate before the truck comes off idle. Camera scope included. Most jobs same-visit.
Call (402) 690-7351Common questions
Hydro jetting FAQs
01 How much does hydro jetting cost in Omaha?
Hydro jetting across the Omaha metro bills at $300/hr, hourly. Most residential main-line jet jobs wrap in about 2 hours ($600 typical, range $600–$1,500 depending on severity). Before + after camera scope is included at no additional charge on every job. No dispatch fee, no diagnostic fee, upfront estimate before work starts.
02 Which Omaha neighborhoods need hydro jetting most often?
Pre-1975 neighborhoods with cast iron mains see the most jet work: Dundee, Benson, Field Club, Bemis Park, Blackstone, Morton Meadows, Leavenworth, Keystone, Miller Park, Florence, Ralston. Scale narrows a 4″ cast iron main down to 2″ or less, and cable work can't touch it. In west Omaha (Linden Estates, 168th corridor, Elkhorn) we see more root intrusion on PVC mains and storm drain work on parking lot catch basins. Either way, scope-first then jet with the right nozzle.
03 When should I jet my sewer main in Omaha?
Three signals say "jet the main." One: multiple fixtures gurgle or back up at once (toilet + tub + basement floor drain means the main is blocked). Two: a drain keeps clogging on the same line every few months after someone cabled it — cable missed the walls. Three: pre-sale scope on an older Omaha home shows scale, roots, or grease narrowing the bore. Typical residential main jet in Omaha runs about 2 hours, $600 typical, up to $1,500 if the line's rough.
04 What is hydro jetting and when do I need it?
Hydro jetting uses 3,500 PSI pressurized water through a specialized nozzle to scour the inside walls of a sewer or drain line clean. Unlike a cable (snake) that punches a hole through a clog, the jetter removes grease, roots, scale, and sludge completely. You need the jetter for: recurring clogs on the same line, grease-heavy commercial kitchens, cast iron scale, root intrusion, backed-up main sewer lines, or storm drains. A single-fixture bathroom clog is still better served by a cable at $95/hr — see drain cleaning in Omaha for that work.
05 Can you hydro jet near me today?
If you're in Omaha, Bellevue, La Vista, Papillion, Elkhorn, or Gretna: usually yes. Most same-day calls wrap same-day during business hours (Mon–Sat, 7a–7p). After-hours and overnight: 24/7 phone, with a disclosed service-call premium before dispatch. Call us and we'll triage on the phone and give you a realistic arrival window.
06 Does hydro jetting work on tree roots?
Yes. A hydro jetter with a root-cutter nozzle clears roots from PVC and cast iron mains. Typical result: 2–3 years of flow before the roots grow back. For permanent root intrusion fixes (pipe lining or spot repair) we refer out — we're the drain-clearing specialist, not the excavation crew. The camera scope included on every jet job shows you exactly how much pipe is affected before we quote.
07 Will hydro jetting damage my pipes?
On sound pipe, no. On pre-existing damaged pipe (cracked, offset, bellied, badly corroded cast iron), high-pressure water can expose what was already failing. That's why every jet job starts with a camera scope at no additional charge. If the pipe isn't sound, we tell you before we open the throttle. Pre-1975 Omaha homes always get the scope first; newer PVC mains, scope + jet is the standard pass.
08 What's included with every hydro jet job?
Upfront estimate before any tool runs. 3,500 PSI jetter with the correct nozzle for your line (flush pattern, root cutter, or penetrator). Before + after camera scope at no additional charge. On-site monitor walk-through so you see the condition yourself. Itemized invoice. Recording available on request. No surprise fees, no portfolio games.
Next step / Make the call
Hydro jetting in the Omaha metro. One number.
(402) 690-7351 · 3,500 PSI · $300/hr · Camera scope included on every job.